107. Ignition Coil Module Installation - Right

Ignition Module Installation - Right





1. Ensure the RFI/ground spring (1) and the seal (2) are in place and inspect each for serviceability.





2. Install the right spark plug boots onto the ignition coil assembly.





Notice: Refer to Fastener Notice in Service Precautions.

3. Install the right spark plugs.
^ Tighten the spark plugs to 15 Nm (11 ft. lbs.).





4. Position the ignition coil assembly on the right camshaft cover.





Important: DO NOT damage the ignition coil perimeter seal.

5. Install the ignition coil assembly bolts in sequence.
^ Tighten the ignition coil assembly bolts to 9 Nm (80 inch lbs.).





6. Install the fuel injector sight shield bracket.
7. Install the fuel injector sight shield bracket bolts.
^ Tighten the fuel injector sight shield bracket bolts to 8 Nm (71 inch lbs.).