85. Oil Pump Suction Pipe and Screen Assembly Installation

Oil Pump Pipe and Screen Assembly Installation





1. Lubricate the silicone seal in the oil manifold plate. With a twisting motion, install the end of the oil pump pick-up tube (2).

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the oil pump pick-up retaining bolt (1) and nut (3).
^ Tighten the oil pump pick-up tube nut to 24 Nm (18 ft. lbs.).
^ Tighten the oil pump pick-up tube bolt to 10 Nm (89 inch lbs.).