Closeout/Insulator Panel Replacement - Right

Closeout/Insulator Panel Replacement - Right

Removal Procedure

1. Open the passenger door.




2. Remove the fasteners (3) in order to disengage the insulator panel (1) from the lower instrument panel.




3. Lower the insulator panel and disconnect the electrical connector.
4. Pull the insulator panel rearward in order to remove.



Installation Procedure





1. Position the insulator panel (1) to the retainer studs (2) below the instrument panel.
2. Connect the electrical connector.
3. Push the insulator panel forward in order to secure to the retainer studs.

Important: Ensure all hanging electrical connections are pushed forward in order to prevent any interference with the insulator panel.


4. Push forward the electrical connections.
5. Lift the insulator panel upward.

Notice: Refer to Fastener Notice in Cautions and Notices.

6. Install the fasteners (3) to the insulator panel.

Tighten the fasteners to 2 N.m (18 lb in).

7. Close the passenger door.