Lock Housing - Disassemble
Lock Housing Assembly- Disassemble -Off Vehicle1. Remove the steering column lock cylinder set.
2. Remove the column housing cover end cap (2).
3. Remove the cruise control connector (3) from the base plate (1) and disconnect.
4. Remove the 3 pan head 6-locked socket tapping screws (1), (2), (3) starting at the 12 o'clock position.
5. Remove the lock housing cover and sleeve assembly (1).
6. Remove the column housing cover end base plate (2) and the dimmer switch rod actuator (3).
7. Remove the switch actuator pivot pin (2).
8. Remove the windshield wiper and washer switch assembly (1) from the lock housing cover and sleeve assembly.