Floor Pan Insulator Replacement

Floor Pan Insulator Replacement

Removal Procedure





1. Remove the rear carpet. Refer to Carpet Replacement - Rear (Removal and Replacement) .
2. Disengage the 2 retainers on the electrical harness securing the insulator to the floor.
3. Remove the insulator.



Installation Procedure






Caution: All floor pan insulator material must meet Federal Vehicle Safety Standards for flammability. Failure to do so could result is personal injury and/or vehicle damage.

1. Install the insulator to the floor pan.
2. Ensure the insulator is positioned properly and free from unnecessary wrinkles.
3. Secure the retainers on the electrical harness to the insulator on the floor.
4. Install the rear carpet. Refer to Carpet Replacement - Rear (Removal and Replacement) .