Blower Motor Replacement - Auxiliary

REMOVAL PROCEDURE




1. Remove the console assembly.
2. Disconnect the electrical connectors from the blower motor.




3. Turn over the console assembly.
4. Remove the three retaining screws (1).




5. Remove the blower motor assembly.

INSTALLATION PROCEDURE




1. Install the blower motor into the console

NOTE: Refer to Fastener Notice in Service Precautions.




2. Install the three retaining screws (1).

Tighten
Tighten the screws to 10 N.m (88 lb in).




3. Connect the electrical connectors.
4. Install the console assembly.