Heater Core: Service and Repair
HEATER CORE REPLACEMENTREMOVAL PROCEDURE
1. Partially drain the coolant. Refer to Draining and Filling Cooling System in Cooling System.
2. Remove the instrument panel compartment.
3. Remove the right sound insulator.
4. Remove the HVAC Control Processor.
5. Disconnect the left air mix actuator (2).
6. Disconnect the right air mix actuator (3).
7. Remove the heater core cover.
8. Remove the inlet and outlet heater hoses from the heater core.
9. Remove the heater retaining screws.
10. Remove the heater core.
INSTALLATION PROCEDURE
NOTE: Refer to Fastener Notice in Service Precautions.
1. Install the heater core to the heater case with two screws.
Tighten
Tighten the screws to 2 N.m (18 lb in).
2. Install the inlet and outlet heater hoses to the heater core.
3. Install the heater core cover and screws.
Tighten
Tighten the screws to 2 N.m (18 lb in).
4. Connect the right air mix actuator (3).
5. Connect the left air mix actuator (2).
6. Install the heater and HVAC control processor.
7. Install the instrument panel compartment.
8. Install the right insulator panel.
9. Refill the cooling system.
10. Adjust the air temperature door links. Refer to Air Temperature Door Link Adjustment - Left and Air Temperature Door Link Adjustment - Right.