Removal and Replacement

REMOVAL PROCEDURE

CAUTION: Refer to Halogen Bulb Caution in Service Precautions.




1. Remove the upper filler panel.
2. Remove the turn signal lamp assembly.




3. Remove the fasteners retaining the headlamp capsule (5) to the headlamp housing panel (2).
4. Partially remove the headlamp capsule.
5. Disconnect the headlamp bulbs from the capsule.
6. Remove the capsule (5).

INSTALLATION PROCEDURE




1. Install the headlamp bulbs to the headlamp capsule
2. Insert the tabs on the capsule in the slots in the housing (2).

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the fasteners in order to retain the headlamp capsule (5) to the headlamp housing panel.

Tighten
Tighten the fasteners to 6 N.m (53 lb in).




4. Install the turn signal lamp.
5. Install the upper filler panel.