F-Note

REMOVAL PROCEDURE




1. Remove the right side lower air deflector.
2. Disconnect the electrical connector from the horn assembly.

IMPORTANT: Note the position of the horn trumpet prior to removal in order to aid in the installation.

3. Remove the bolt (2) securing the horn assembly to the vehicle.
4. Remove the nut securing the horn to the bracket.
5. Remove the horn.

INSTALLATION PROCEDURE




1. If wiring repairs are needed, refer to Splicing Copper Wire Using Splice Sleeves in Diagrams.
2. Install the new horn to the original bracket.
3. Ensure the trumpet is at the same position as noted in the removal procedure.

NOTE: Refer to Fastener Notice in Service Precautions.

4. Install the supplied lock washer and nut.

Tighten
Tighten the supplied nut to the original bracket to 10 N.m (89 lb in).

5. Locate the tab on the horn assembly bracket to the hole in the vehicle body.
6. Install the bolt (2) in order to secure the horn assembly (1) to the body.

Tighten
Tighten the bolt to 17 N.m (12 lb ft).

7. Install the new 2 pin electrical connector to the new horn.
8. Ensure the locking tabs are secure.
9. Connect the electrical connector to the new 2 pin connector.
10. Install the lower air deflector.