Underhood Lamp: Service and Repair

UNDERHOOD LAMP REPLACEMENT

REMOVAL PROCEDURE




1. Open the hood.
2. Disconnect the underhood lamp electrical connector (3) from the underhood lamp (1).
3. Remove the fasteners (2) securing the underhood lamp (1) to the inner hood panel (4).
4. Remove the underhood lamp (1).

INSTALLATION PROCEDURE




1. Install the underhood lamp (1) to the inner hood panel (4).

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the fasteners (2) in order to retain the underhood lamp (1) to the inner hood panel (4).

Tighten
Tighten the fasteners to 2 N.m (18 lb in).

3. Connect the electrical connector (3).
4. Close the hood.