Ambient Temperature Sensor / Switch HVAC: Service and Repair
AMBIENT AIR TEMPERATURE SENSOR REPLACEMENTREMOVAL PROCEDURE
1. Disconnect the electrical connector from the ambient air sensor (1).
2. Remove the retaining screw (2).
3. Remove the ambient air sensor (1).
INSTALLATION PROCEDURE
1. Install the sensor (1) to the bracket (3).
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the sensor screw (2).
Tighten
Tighten the screw (2) to 2 N.m (18 lb in).
3. Connect the electrical connector to the sensor (1).