Blower Motor Switch: Service and Repair
BLOWER MOTOR SWITCH REPLACEMENT - AUXILIARYREMOVAL PROCEDURE
1. Using a flat bladed tool, carefully lift out on the blower switch knob.
2. Remove the rear trim plate from the console.
3. Remove the screws retaining the rear blower switch.
4. Disconnect the electrical connector.
5. Remove the rear blower switch.
INSTALLATION PROCEDURE
1. Connect the rear blower switch electrical connector.
2. Install the blower switch to the trim plate.
3. Install the screws that retain the blower switch to trim plate.
4. Install the rear console trim plate.