Air Flow Meter/Sensor: Service and Repair

MASS AIR FLOW/INTAKE AIR TEMPERATURE (IAT) SENSOR REPLACEMENT

REMOVAL PROCEDURE




1. Disconnect the mass air flow/intake air temperature (MAF/IAT) sensor electrical connector (1).
2. Remove the clamps securing the MAF/IAT sensor assembly to the air cleaner and intake air duct.

NOTE: Refer to Mass Air Flow (MAF) Handling Notice in Service Precautions.

3. Carefully remove the MAF/IAT sensor from the air cleaner and intake air duct.

INSTALLATION PROCEDURE

NOTE: Refer to Mass Air Flow (MAF) Handling Notice in Service Precautions.




1. Carefully install the MAF/IAT sensor (1) into the air cleaner and intake air duct.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the clamps securing the MAF/IAT sensor assembly to the air cleaner and intake air duct.

Tighten
Tighten the clamps to 3 N.m (27 lb in).

3. Reconnect the MAF/IAT sensor electrical connector (1).