Turn Signal Cancel Cam & Steering Shaft Upper Bearing Spring - Disassemble

Turn Signal Cancel Cam and Upper Bearing Inner Race - Disassemble - Off Vehicle

- Tools Required
- J 23653-SIR Steering Column Lock Plate Compressor





1. Remove the inflatable restraint steering wheel module coil.
2. Remove the wave washer.





3. Compress the shaft lock using J 23653-SIR.
4. Remove and discard the bearing retainer (1) using J 23653-SIR.
5. Remove J 23653-SIR from the steering shaft assembly.





6. Remove the shaft lock (1).
7. Remove the turn signal cancel cam assembly (2).
8. Remove the upper bearing spring (3).





9. Remove the upper bearing inner race seat (1).
10. Remove the inner race (2).