RH Window Switch Operation

The battery voltage is applied from the WINDOWS circuit breaker through CKT 42 (RED) to the accessory time delay relay. The accessory time delay relay supplies the voltage through CKT 70 (PNK) to the RH window switch under the following conditions:
^ The ignition is in the RUN position.
^ The RAP is active.

When the UP switch is pressed, the voltage is applied to one terminal of the power window motor through CKT 666 (DK BLU). Ground is applied to the opposite terminal of the power window motor from the LH window switch through the right front power window switch on the following circuits:
^ CKT 167 (TAN)
^ CKT 667 (BRN)

When the DOWN switch is pressed, the voltage is applied to one terminal of the power window motor through CKT 667 (BRN). Ground is applied to the opposite terminal of the power window motor from the LH window switch through the RH window switch on the following circuits:
^ CKT 166 (LT BLU)
^ CKT 666 (DK BLU)