Assemble-Off Vehicle

Windshield Wiper and Washer Switch Assembly - Assemble - Off Vehicle
1. Install the windshield wiper and washer switch assembly to the lock housing cover and sleeve assembly.





2. Lubricate the switch actuator pivot pin (2) with lithium grease.
3. Install the switch actuator pivot pin (2) into the windshield wiper and washer switch assembly (1) and the lock housing cover and sleeve assembly.

Important: Use care not to damage the wires when pulling the windshield wiper and washer switch assembly wire harness through the steering column.

4. Pull the windshield wiper and washer switch assembly wire harness through the steering column.
5. Install the windshield wiper and washer switch assembly connector to the bulkhead connector.
6. Install the wire protector shield.
7. Install the lock housing assembly.