Instrument Panel (IP) - Defroster Grille Replacement

REMOVAL PROCEDURE

CAUTION: Refer to SIR Handling Caution in Service Precautions.




1. Disable the SIR. Refer to Disabling the SIR System in Restraint Systems.
2. Remove the instrument panel (IP) upper trim panel.
3. Remove the fasteners (2) that secure the defroster grille to the IP carrier.
4. Partially remove the defroster grille in order to disconnect the sunload sensors from the defroster grille. Refer to Sunload and Twilight Sentinel Sensor Replacement.
5. Remove the defroster grille (3).

INSTALLATION PROCEDURE




1. Connect the electrical connectors and install the sunload sensors to the defroster grille.
2. Align the defroster grille (3) with the IP carrier.

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the defroster grille fasteners (2).

Tighten
Tighten the defroster grille fasteners to 2 N.m (18 lb in).

4. Install the IP upper trim panel.
5. Enable the SIR. Refer to Enabling the SIR System in Restraint Systems.