Power Sunroof Does Not Close from Vent Position

DIAGNOSTIC AIDS
The sunroof switch close vent signal circuit can cause the sunroof not to respond correctly, if it were an open or a short to voltage. Refer to Circuit Testing and Wiring Repairs in Diagnostic Aids. If the circuits test OK, an intermittent or poor connection can also cause the sunroof not to operate normally. Refer to Testing for Intermittent and Poor Connections in Diagnostic Aids.

TEST DESCRIPTION

Steps 1-10:

Steps 11-22:

The steps below refer to the test steps in the diagnostic table.
8. Test for RAP relay switch supply voltage of the sunroof module. If voltage is not present, go to the RAP Inoperative table.