Front Seat

REMOVAL PROCEDURE

CAUTION: Refer to SIR Handling Caution in Service Precautions.




1. Remove seat back trim cover.
2. Remove seat belt post rear cover.
3. Remove upper front seat belt post cover.
4. Remove head restraint from support shaft.
^ Insert a small flat-bladed tool in the top and bottom of the support shaft opening.
^ Push in on the flat-bladed tool to release the head restraint retaining clips.
^ Pull the head restraint from the support shaft.

INSTALLATION PROCEDURE




1. Install the head restraint onto the shaft. Apply pressure until the clips engage.
2. Install upper front seat belt post cover.
3. Install rear seat belt post cover.
4. Install seat back trim cover.