Daytime Running Lamps (Norway and Sweden)

The DRL will operate when the ignition switch is in the ON position, the gear selector is out of the PARK position, the headlamp switch is in the OFF position, and the ambient light sensor indicates daytime conditions. Battery positive voltage is supplied from the rear fuse block EXPORT LGT fuse to the DRL relay coil and switch. When the Dash Integration Module (DIM) determines that conditions are present to activate the DRL, the DIM grounds the DRL relay coil. This energizes the DRL relay coil. Battery positive voltage is supplied through the DRL relay switch and to each low beam headlamp. The low beam head lamps have ground at G401. The park lamps will also illuminate.