Radiator Hose Replacement - Inlet
Radiator Hose Replacement - InletTools Required
^ J37097-A Hose Clamp Remove/Installer
^ J38185 Hose Clamp Pliers
Remove Procedure
1. Partially drain the cooling system.
2. Remove the upper filler panel.
3. Position the J38185 (2) to the clamp in order to remove the inlet radiator hose (1) from the water housing crossover.
4. Position the J37097-A to the clamp in order to remove the inlet radiator hose from the radiator.
5. Remove the inlet radiator hose from the vehicle.
Installation Procedure
1. Position the J37097-A to the clamp in order to connect the inlet radiator hose to the radiator.
2. Position the J38185 (2) to the clamp in order to connect the inlet radiator hose (1) to the water housing crossover.
3. Install the upper filler panel.
4. Fill the cooling system.