Electronic Suspension Control Module Replacement (F45)

Electronic Suspension Control Module Replacement (F45)

Removal Procedure
1. Remove the rear compartment trim panel.
2. Access the rear electronics compartment.





3. Disconnect the harness connectors from the ESC module.
4. Remove the ESC module from the right electronics bay.

Installation Procedure





1. Install the ESC module in the right electronics bay.
2. Connect the harness connectors to the ESC module.
3. Close the rear electronics compartment.
4. Install the rear compartment trim panel.
5. Perform the ESC module Calibration. Programming and Relearning