Programming Features - With Tech 2

ENTER PROGRAMMING
To enter programming with the Tech 2, perform the following actions:
1. Install the scan tool.
2. Turn ON the ignition with the engine OFF.
3. Select the correct vehicle and model year.
4. Select Body.
5. Select Personalization.

AUTOMATIC DOOR LOCKS
Continue with the following steps in order to program the automatic door locks:
1. Select Set Options.
2. Select Driver #1 Automatic Door Lock Mode or Driver #2 Automatic Door Lock Mode.
3. Highlight the desired mode from the following choices, see Automatic Door Locks modes above for mode descriptions:
^ Mode 0
^ Mode 1
^ Mode 2
^ Mode 3
^ Mode 4
^ Mode 5
4. Exit from the menu.

DRIVER ID:
Continue with the following steps in order to enter a new driver ID:
1. Select Driver Information Center.
2. Select Driver #1 or Driver #2.
3. Select Driver #1 Name or Driver #2 Name, depending on your previous choice.
4. The Tech 2 tool displays directions for entering the Driver's Name. Read and press Enter.
5. The Tech 2 tool now displays 17 symbol numbers, with each number (32 through 255) corresponding to a symbol on the ASCII Character Table. Use the Left or Right arrows to scroll to the desired placeholder.
6. Use the Clear Entry special function button on the Tech 2 tool to clear the current symbol number for that placeholder.
7. Use the numerical keypad to enter the new symbol number. Press Enter.
8. When all 17 symbol numbers are as customer desired, press the Save Name special function button on the Tech 2 tool to store the new Driver's Name in the Instrument Panel Cluster's memory.

MEMORY SEATS
Continue with the following steps in order to program the memory seat options:
1. Select Set Options.
2. Select Driver #1 Memory Recall or Driver #2 Memory Recall.
3. Select one of the following options:
^ Auto Exit Driver Seat
^ Key in IGN Recall Driver Seat
^ Remote Entry Recall Driver Seat
^ Recall Exit on RKE Unlock
4. Press ENTER to turn the option ON or OFF. An asterisk appears beside the current option.
5. Exit from the menu.
6. Select Driver #1 Auto Exit Seat or Driver #2 Auto Exit Seat.
7. Highlight Auto Exit Seat and press the ENTER button to turn the selection ON or OFF. An asterisk appears when the feature is turned ON.
8. Exit from the menu.

PARALLEL PARK ASSIST
Continue with the following steps in order to program the parallel park assist feature:
1. Select Set Options
2. Select Driver #1 Curb View or Driver #2 Curb View.
3. Highlight Parallel Park Assist and press the ENTER button to turn the feature ON or OFF. An asterisk appears when the feature is turned ON.
4. Exit from the menu.

PERIMETER LIGHTING
Continue with the following steps in order to program the perimeter lighting feature:
1. Select Set Options.
2. Select Driver #1 Perimeter Lighting, Driver #2 Perimeter Lighting, Driver #3 Perimeter Lighting, or Driver #4 Perimeter Lighting.
3. Highlight Perimeter Lighting and press the ENTER button to turn the feature ON or OFF. An asterisk appears when the feature is turned ON.
4. Exit from the menu.

REMOTE ACTIVATION VERIFICATION
Continue with the following steps in order to program the remote activation verification feature:
1. Select Set Options.
2. Select Driver #1 Activation Verification or Driver #2 Activation Verification.
3. Highlight the desired mode from the following choices, see Remote Activation Verification modes above for mode descriptions:
^ Mode 0
^ Mode 1
^ Mode 2
^ Mode 3
^ Mode 4
^ Mode 5
4. Press the ENTER button to turn the mode ON or OFF. An asterisk appears beside the current mode. You must turn the current mode OFF before you can turn another one ON.
5. Exit from the menu.