Horn: Service and Repair

REMOVAL PROCEDURE




1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the lower air deflector.
3. Disconnect the electrical connectors (1) from the horns (2).




4. Remove the fasteners securing the horns (1) to the frame rail.
5. Remove the horns (1) from the body.
6. Note the orientation of the horn bracket, relative to the horn trumpet.
7. Remove the horn from the bracket.

INSTALLATION PROCEDURE

NOTE: Refer to Fastener Notice in Service Precautions.




1. Install the replacement horn to the original bracket or the replacement bracket supplied with the kit Verify the orientation of the horn trumpet to the mounting bracket is correct

Tighten
Tighten the horn to the mounting bracket fastener to 10 N.m (90 lb in).

2. Install the horns (1) to the frame rail.
3. Install the fasteners to secure the horns (1) to the body.

Tighten
Tighten the fasteners to 15 N.m (11 lb ft).




4. Connect the horn electrical connectors (1) to the horns (2).
5. Install the front air deflector.
6. Lower the vehicle. Refer to Lifting and Jacking the Vehicle.