Operation CHARM: Car repair manuals for everyone.

Mechanical Specifications

Fastener Tightening Specifications
Accelerator Controls Cable Bracket Bolts 12 N.m
Accelerator Controls Pedal Assembly 9 N.m
Camshaft Position (CMP) Sensor Retaining Bolt 10 N.m
Crankshaft Position (CKP) Sensors Retaining Bolt 10 N.m
EGR Heat Shield Nuts 9 N.m
EGR Valve 24 N.m
Engine Coolant Temperature (ECT) Sensor 20 N.m
Exhaust Gas Recirculation (EGR) Pipe 60 N.m
EVAP Canister Bracket Retainer Nut 6 N.m
EVAP Canister Purge Valve Bolt 12 N.m
EVAP Vent Valve Bolt 6 N.m
Evaporative Emission (EVAP) Canister 6 N.m
Fuel Filler Pipe Clamp 4.2 N.m
Fuel Filter Outlet Fitting 30 N.m
Fuel Injector Sight Shield Nuts 2.3 N.m
Fuel Rail Assembly Studs 10 N.m
Fuel Rail Bracket Retainer Nut 10 N.m
Fuel Sender Access Panel Bolts 2 N.m
Fuel Tank Filler Pipe Ground Wire Attaching Bolt 9 N.m
Fuel Tank Retaining Strap Bolts 46 N.m
Heated Oxygen Sensor (HO2S) 41 N.m
Idle Air Control Valve Attaching Bolts 3 N.m
Ignition Coil Cassette Retaining Bolts 9 N.m
Ignition Control Module Retaining Screws 0.8 N.m
Intake Air Duct Clamps 3 N.m
Knock Sensor (KS) 25 N.m
Powertrain Control Module (PCM) Connector Screws 8 N.m
Rear Frame Bolts 100 N.m
Secondary Air Injection (AIR) System Bolts/Nuts (Pumps, Shut-off Valves, etc.) 9 N.m
Spark Plugs 17-23 N.m
Throttle Body Attaching Bolts 12 N.m
Throttle Position (TP) Sensor Attaching Screws 2.3 N.m
Water Pump Housing Bolt (EGR Crossover Pipe) 24 N.m