Maintenance Indicator - A/T: Service and Repair

HOW TO RESET THE TRANSAXLE FLUID INDICATOR

After the transaxle fluid has been changed, the transaxle fluid change indicator must be reset. To reset the indicator. do the following:

1. Press the INFO button on the Driver Information Center (DIC) until "TRANS FLUID LIFE" is displayed.
2. Press and hold the RESET button until "100%" is displayed. This resets the transaxle fluid change indicator.

The percentage of transaxle fluid life remaining may be checked at any time by pressing the INFO on the DTC until the "TRANS FLUID LIFE" message appears.