Heated Seat Switch Replacement - Rear

REMOVAL PROCEDURE




1. Remove the rear inside door handle.
2. Disconnect the electrical connector (2) from the rear heated seat switch (3).
3. Remove the two heated seat switch fasteners (1).
4. Remove the rear heated seat switch (2) from the door panel.

INSTALLATION PROCEDURE




1. Install the rear heated seat switch (2) to the door panel.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the two fasteners (1).

Tighten
Tighten the fasteners fully driven, seated, but not stripped.

3. Install the rear inside door handle.