Stoplamp Switch Replacement (LHD)

Stoplamp Switch Replacement (LHD)

Removal Procedure





1. Remove the left sound insulator.
2. Disconnect the electrical connectors from the switch.
3. Rotate the stoplamp/ABS/shift lock switch (2) counterclockwise, then pull to remove the switch.

Installation Procedure

Important: The stoplamp switch is self adjusting when installed properly in the fully locked position. The twist lock type switch requires no further adjustment.





1. Install the stoplamp switch into the retainer.
2. Press the switch (2) into the retainer until the switch plunger is fully depressed into the switch barrel.
3. Rotate the switch (2) clockwise until travel has stopped and the switch locks fully into position
4. Connect the stoplamp/ABS/shift lock switch electrical connectors to the stoplamp switch (2).
5. Install sound insulator.