Antenna Replacement - Global Positioning System (Gps)

ANTENNA REPLACEMENT - GLOBAL POSITIONING SYSTEM (GPS)

REMOVAL PROCEDURE
1. Remove the I/P retainer.




2. Remove the screws (1) securing the global position antenna to the I/P carrier.
3. Remove the wiring from the carrier.

IMPORTANT: Do not splice the wiring or make the antenna lead shorter.

INSTALLATION PROCEDURE




1. Route the antenna wire to the carrier.
2. Install the antenna to the carrier.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the screws to 2 N.m (18 lb in).

3. Install the I/P retainer.