Fender Replacement - Front

Fender Replacement - Front

Removal Procedure


Notice: When removing body panels, apply tape to corners of panel and adjacent surfaces to help prevent paint damage.

1. Remove the headlamp. Refer toHeadlamp Assembly or Headlamp Bulb and/or Cornering, Sidemarker, Park, Turn Signal Bulb Replacement in Lighting Systems.
2. Remove the hood. Refer toHood Replacement (Service and Repair) .
3. Remove the front wheelhouse liner. Refer toWheelhouse Liner Replacement - Front (Service and Repair) .
4. Remove the rocker panel molding. Refer toMolding Replacement - Rocker Panel () in Exterior Trim.




5. Remove the bolts (1) securing the lower front portion of the front fender to the vehicle.




6. Remove the bolts (1) securing the lower rear portion of the front fender to the vehicle.




7. Remove the bolt (2) securing the upper rear portion of the front fender to the vehicle.




8. Loosen the bolt on the inside of fender to door pillar.
9. Remove shield from upper portion of fender by depressing tabs (battery side only).



Remove the bolts (1) securing the upper portion of the front fender to the vehicle.
10. Remove the front fender from the vehicle.



Installation Procedure





1. Position the front fender to the vehicle.

Notice: Refer toFastener Notice in Cautions and Notices.

2. Install the bolts (1) in order to secure the upper portion of the front fender to the vehicle.

Tighten the bolts to 9 Nm (80 lb in).

3. Install the bolt (2) in order to secure the rear portion of the front fender to the vehicle.

Tighten the bolt to 9 Nm (80 lb in).





4. Install the bolts (1) in order to secure the lower rear portion of the front fender to the vehicle.

Tighten the bolts to 9 Nm (80 lb in).





5. Install the bolts (1) in order to secure the lower front portion of the front fender to the vehicle.

Tighten the bolt to 9 Nm (80 lb in).

6. Install the hood. Refer toHood Replacement (Service and Repair) .
7. Install the front wheelhouse liner. Refer toWheelhouse Liner Replacement - Front (Service and Repair) .
8. Install the rocker panel molding. Refer toMolding Replacement - Rocker Panel () in Exterior Trim.
9. Install the headlamp. Refer toHeadlamp Assembly or Headlamp Bulb and/or Cornering, Sidemarker, Park, Turn Signal Bulb Replacement in Exterior Lighting.