Armrest Replacement - Rear Seat

ARMREST REPLACEMENT - REAR SEAT

REMOVAL PROCEDURE
1. Remove the seat back from the vehicle.




2. Release the seat back lower J channel (1) to gain access to the armrest retainers.




3. Remove the armrest retaining nuts (1).
4. Remove the armrest from the seat back.

INSTALLATION PROCEDURE
1. Install the armrest to the seat back.




2. Install the armrest retaining nuts (1) and tighten to:

Tighten
Tighten the retaining nuts to 10 N.m (88 lb in).

NOTE: Refer to Fastener Notice in Service Precautions.




3. Fasten the seat back cover J channel (1).
4. Install the seat back into the vehicle.