51. Cylinder Head Assemble
Cylinder Head AssemblyTools Required
- J 8062 Valve Spring Compressor
- J 41774 Valve Spring Compressor Adapter
- J 41775 Valve Seal Installer
1. Coat the valve stem with engine oil.
2. Insert the valve stem into the guide.
3. Install the valve spring seat.
4. Use the J 41775 to insert the valve seal (1).
5. Install the valve spring.
6. Install the cap on the valve stem.
7. Use the J 8062 and the J 41774 to compress the valve spring.
8. Perform the following steps to install the valve stem keys:
8.1. Use a light grease to hold the keys in place.
8.2. Remove the J8062 and the J41774.
8.3. Seat the valve stem keys in the upper groove of the valve stem.
9. Install the lifter.
10. Repeat the above sequence for the remaining valves.