Headlamp Leveling Sensor Replacement - Rear
HEADLAMP LEVELING SENSOR REPLACEMENT - REARREMOVAL PROCEDURE
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the right rear tire and wheel assembly.
3. Remove electrical connector (2).
4. Disconnect the ball and socket (3) from vehicle.
5. Remove the bolt (1) from the sensor.
6. Remove the sensor from the vehicle.
INSTALLATION PROCEDURE
1. Position the sensor (3) to the vehicle.
2. Install the bolt (1) to secure the sensor (4) to the vehicle.
3. Install ball and socket (3) to sensor (4).
4. Reconnect electrical connector (2) to the sensor (4).
5. Install tire and wheel assembly.
6. Lower vehicle. Refer to Vehicle Lifting.