Right Hand Drive

Surge Tank Hose/Pipe Replacement - Inlet (RHO)

Tools Required
- J 38185 Hose Clamp Pliers

Removal Procedure
1. Partially drain the cooling system.







2. Position the J 38185 to the clamp in order to remove the surge tank inlet hose (1) from the surge tank (3).







3. Position the J 38185 to the clamp in order to remove the surge tank inlet hose from the radiator.







4. Disconnect the air intake duct hoses from the throttle body assembly.







5. Position the J 38185 to the clamp in order to remove the surge tank inlet hose from the throttle body assembly.
6. Remove the surge tank inlet hose from the vehicle.




Installation Procedure







1. Position the J 38185 to the clamp in order to connect the surge tank inlet hose to the throttle body assembly.







2. Connect the air intake duct hoses to the throttle body assembly.







3. Position the J 38185 to the clamp in order to connect the surge tank inlet hose to the radiator.







4. Position the surge tank inlet hose to the retaining feature of the underhood fuse block cover.
5. Route the surge tank inlet hose under the hood assist rod support.







6. Position the J 38185 to the clamp in order to connect the surge tank inlet hose (1) to the surge tank (3).
7. Fill the cooling system.