Steering Wheel: Service and Repair

Steering Wheel Replacement

^ Tools Required
- J 1859-A Steering Wheel Puller
- J 42578 Steering Wheel Puller Legs

Removal Procedure

Caution: Refer to SIR Caution In Service Precautions.

1. Disable the SIR system.
2. Remove the inflatable restraint steering wheel module.





3. Disconnect the steering column electrical connector.





4. Remove the steering wheel retaining nut.





5. Install J 42578 and J 1859-A to the steering wheel.
6. Using J 42578 and the J 1859-A remove the steering wheel.

Installation Procedure





1. Install the steering wheel.

Notice: Refer to Fastener Notice in Service Precaution.

2. Install the steering wheel retaining nut.
^ Tighten the nut to 41 Nm (30 ft. lbs.).





3. Connect the steering column electrical connector.
4. Install the inflator module.
5. Enable the SIR system.