B2880

DTC B2880

Steps 1-8:

Circuit Description
The steering column module the position of the steering column based on inputs received from position sensor built into the tilt actuator. The steering column module,supplies a 5 volt reference and a ground to the sensor and monitors the column position via a tilt position signal circuit.

Conditions: for Running the DTC
DTC B1327 is not set as current.

Conditions for Setting the DTC
This DTC will set as current when the voltage is great fir than 4.8 volts for 2 seconds on the actuator circuit.

Action Taken When the DTC Sets
The steering column module will not allow the affected motor to work during memory recall and/or easy exit operations. However, the motor will still operate for manual switch positioning.

Conditions for Clearing the DTC
^ This DTC will clear from current status when the voltage is less than 4.8 volts for 2 seconds.
^ Use a scan tool.