Cigar Lighter Housing Replacement - DeVille & DeVille Luxury

CIGAR LIGHTER HOUSING REPLACEMENT (KD, KE)

TOOLS REQUIRED
J 42059 Cigar Lighter Socket Remover

REMOVAL PROCEDURE




1. Remove the cigar lighter fuse.
2. Remove the cigar lighter element.
3. Remove the cigar lighter housing by placing one side of the T portion of the tool J 42059 into the tab window and then the other should be angled into the opposite tab window, then pull the lighter housing straight out.
4. Remove the tool from the lighter housing.




5. Pull the cigar lighter housing (3) and cigar lighter retainer (2) out of the ash tray.
6. Disconnect the electrical connector (1) from the cigar lighter (3).
7. Remove the cigar lighter retainer (2) from the cigar lighter housing (3).

INSTALLATION PROCEDURE




1. Install the cigar lighter retainer (1) to the ash tray, by pressing the retainer into place until fully seated.
2. Connect the electrical connector (2) to cigar lighter housing (1).




3. Align the cigar lighter (2) key way, to the key slot in the retainer ring (1).




4. Press the cigar lighter into place until the cigar lighter housing is fully seated.
5. Install the cigar lighter fuse.
6. Install the cigar lighter element.