Instrument Panel (IP) - Trim Panel Replacement - Center

Trim Panel Replacement - Instrument Panel (I/P) Center

Removal Procedure





1. Use a small hooked tool and reach behind the center trim panel (1) near the top of the panel, next to the HVAC control, and pull out on each side.
2. Pull towards the rear of the vehicle in order to disengage the center trim panel retainers.
3. Remove the center trim panel (1).



Installation Procedure





1. Align the retainers and the alignment posts on the center trim panel (1) to the IP .
2. Push firmly on the center trim panel (1) towards the front of the vehicle in order to engage the center trim panel retainers.