Keyless Entry Receiver: Service and Repair

REMOTE CONTROL DOOR LOCK RECEIVER REPLACEMENT

REMOVAL PROCEDURE




1. Remove the rear compartment trim.
2. Disconnect the electrical connector from the remote control door lock receiver.
3. Remove the remote control door lock receiver (1) from the vehicle.

INSTALLATION PROCEDURE




1. Install the remote control door lock receiver (1) to the rear shelf.
2. Reconnect all electrical connectors.
3. Install the rear storage compartment trim.
4. Program the new remote control door lock receiver to recognize the transmitters for the vehicle. Refer to Transmitter Programming. Programming and Relearning