Engine to Transaxle Brace Replacement
Engine to Transaxle Brace ReplacementRemoval Procedure
1. Remove the right front wheel.
2. Remove the heat shield fasteners.
3. Remove the heat shield.
4. Remove the fasteners from the brace.
5. Remove the brace.
Installation Procedure
1. Install the engine to transaxle brace.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the fasteners into the engine and transmission.
^ Tighten the brace bolts to 50 Nm (37 ft. lbs.).
3. Install the heat shield.
4. Install the heat shield fasteners.
^ Tighten the heat shield nuts to 50 Nm (37 ft. lbs.).
5. Install the right front tire.