Interior Moulding / Trim: Service and Repair

Coat Hook Replacement

Removal Procedure





1. Rotate the coathook (1) to the open position.




2. Using a flat-bladed screwdriver, pry the lower rear edge of the coathook escutcheon up.
3. Push the escutcheon inboard to relieve the hidden snap at the top.
4. Slide the escutcheon to the center of the assist strap.
5. Remove the fastener and remove the coathook assembly.



Installation Procedure

1. Attach the coathook (1) assembly with the fastener.
2. Rotate the coathook (1) to the open position.
3. Slide the coathook (1) escutcheon into place. A snap should engage at the top and the lower rear edge of the escutcheon.




4. Rotate the coathook to the closed position.