Cupholder Replacement - Front Seat
CUPHOLDER REPLACEMENT - FRONT SEATREMOVAL PROCEDURE
1. Remove the front center seat assembly
2. Turn center seat over in order to expose the bottom of the center seat assembly.
3. Remove the three fasteners (1) from the cupholder assembly.
4. Turn the center seat over in order to access the cupholder lid.
5. The center seat cupholder (1) has three clips holding it in place after the three fasteners are removed. A sharp tug on the cupholder (1) will release the clips.
Remove the center seat cupholder (1) from the center seat assembly.
INSTALLATION PROCEDURE
1. Install the center seat cupholder (1) to the center seat.
Push the cupholder (1) firmly into position in order to engage the cupholder retainer clips.
2. Turn the center seat over in order to expose the bottom of the center seat.
3. Install the three center seat cupholder fasteners (1).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the fasteners (1) to 1.5 N.m (13 lb in).
4. Install the center seat assembly.