Blower Motor Replacement - Auxiliary

BLOWER MOTOR REPLACEMENT - AUXILIARY

REMOVAL PROCEDURE
1. Remove the instrument panel (IP).
2. Remove the left and right carpet retainers.
3. Remove the front carpeting in order to access the rear ducts.
4. Remove the ducts from the rear blower/IP center support assembly (1, 2).




5. Remove the auxiliary blower motor nuts (3) retaining the rear blower/IP center support assembly (1, 2) to the floor.




6. Remove the rear blower/IP center support assembly from the vehicle.
7. Remove the rear blower motor.

INSTALLATION PROCEDURE
1. Install the rear blower motor to the IP center support assembly.




2. Install the rear blower/IP center support.




3. Install the nuts (3) that retain the auxiliary blower motor/IP center support assembly (1, 2) to the vehicle floor

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the nuts (3) to 9 N.m (80 lb in).

4. Install the ducts to the rear blower/IP center support assembly.
5. Install the front carpeting.
6. Install the left and right carpet retainers.
7. Install the instrument panel (IP).