Brake Lamp: Description and Operation
STOP LAMPSThe STOP LP fuse in the rear fuse block supplies battery positive voltage to the normally open stop lamp switch. When the brake pedal is pressed, the stop lamp switch contacts close and battery positive voltage is supplied to the center high mounted stop lamp (CHMSL) and the turn signal/hazard flasher module stop lamp switch signal input. In response to this input the turn signal/hazard flasher module supplies battery positive voltage to the left and right LED tail lamp assemblies. The CHMSL and left tail lamp have ground at G402. The right tail lamp has ground at G401. The stop lamps illuminate when they receive both power and ground.