Scan Tool Data Definitions

SCAN TOOL DATA DEFINITIONS

Battery Voltage: Displays 0 to 25.5 volts. The battery voltage level at the module.

Control Power: Displays Off or On. The commanded state of the control power terminal.

Daytime Running Lamp: Displays Off or On. The commanded state of the DRL relay.

Driver Door Jamb Sw: Displays ON or OFF. The status of the driver door jamb switch.

Flash to Pass Switch: Displays Off or On. The status of the flash to pass switch.

Fluorescent Light: Displays 0 to 100%. The fluorescent light level of the instrument cluster.

Front Fog Lamp Relay: Displays Off or On. The commanded state of the front fog lamp relay.

Front Fog Lamp Switch: Displays Off or On. The status of the front fog lamp switch.

Hazard Lamp Switch: Displays Off or On. The status of the hazard lamp switch.

Head Lamp Switch: Displays Off or On. The status of the headlamp switch.

High Beam Output: Displays Off or On. The commanded state of the flash to pass control terminal.

High Beam Output (Flash to Pass): Displays Off or On. The commanded state of the flash to pass control terminal.

Hood Jamb Switch: Displays Off or On. The status of the hood jamb switch.

Incandescent Dim #1: Displays the percentage of dimming sent to the incandescent lamps.

Interior Dim Pot: Displays 0-5 volts. The interior dimmer switch input signal.

Interior Lamp Input: Displays Off or On. The status of the inadvertent power input.

Interior Lamp Switch: Displays Auto or On. The status of the interior lamp switch.

Interior Lighting Relay: Displays Off or On. The commanded state of the interior lamp relay.

Left Rear Door Jamb Sw.: Displays ON or OFF. Indicates the status of the left rear door jamb switch.

Left Turn Signal: Displays Off or On. The status of the discrete left turn signal. The instrument cluster uses this input to determine when to flash the left turn indicator.

Low/High Beam Output: Displays Off or On. The commanded state of the headlamp control terminal.

Overhead Lamps Output: Displays Off or On. The status of the CTSY LP 1 terminal.

Park Lamp: Displays Off or On. The status of the park lamp switch.

Park Lamp Relay Output: Displays Off or On. The commanded state of the park lamp relay.

Pas. Door Jamb Sw: Displays ON or OFF. Indicates the status of the passenger door jamb switch.

Position Lamp Disable: Displays Off or On. The commanded state of the standing lamp relay.

Reverse Lamp Relay: Displays Off or On. The commanded state of the reverse lamp relay.

Right Turn Signal Displays Off or On.: The status of the discrete right turn signal. The instrument cluster uses this input to determine when to flash the right turn indicator.

Rt Rear Door Jamb Sw: Displays ON or OFF. Indicates the status of the right rear door jamb switch.

Switch Dimming: Displays the percentage of dimming control of the appropriate door control module output.

Trailer Detection Input: Displays Off or On. The status of the trailer detect terminal.

Twilight Delay Pot: Displays 0-5 volts. The twilight delay switch input signal.

Twilight Photocell: Displays 0-5 volts. The ambient light sensor input signal.

VF Dim: Displays Off or On. The vacuum fluorescent (VF) display dimming level of the instrument cluster.

Wiper Switch: Displays Off or On. The status of the wiper switch.