Jacking
JACKINGWhen you are lifting a vehicle with a vehicle jack or a floor jack, block the wheels at the opposite end from which you are lifting. Use jack stands to provide additional support.
Under The Frame Rails
IMPORTANT:
- The floor jack pad must not contact the rocker panel to the outside of the frame rail reinforcements.
- The floor jack pad must not contact the floor pan.
Position the floor jack pad as follows:
Under the frame rail reinforcements.
Jack Stands
Under The Frame Rails
IMPORTANT: The jack stands must not contact the rocker panels, the front fenders or the floor pan.
Position the jack stands as follows:
Under the frame rail reinforcements.
Under The Front Suspension Crossmember
Position the jack stands as follows:
- Spanning at least two of the (front suspension crossmember) rear reinforcement ribs (preferred location).
- Spanning both of the (front suspension crossmember) front reinforcement ribs (optional location).
Under The Rear Suspension Crossmember
IMPORTANT: The jack stands must not be placed under the (rear suspension crossmember) front reinforcement rib.
Position the jack stands as follows:
Spanning both of the (rear suspension crossmember) rear reinforcement ribs.