Heated Seat Control Module Replacement - Front
HEATED SEAT CONTROL MODULE REPLACEMENT - FRONTREMOVAL PROCEDURE
1. Remove the front seat cushion assembly.
CAUTION: Refer to SIR Caution in Service Precautions.
2. Disconnect the electrical connectors from the heated seat control module (2) and the memory seat module (1).
3. Bend the tabs on the module and bracket assembly in order to remove the module or modules (1, 2) and bracket assembly from the seat adjuster.
4. Remove the fasteners retaining the heated seat control module (2) to the module bracket.
5. Remove the heated seat control module (2) from the bracket.
INSTALLATION PROCEDURE
1. Install the heated seat control module (2) to the module bracket and install the memory seat module fasteners.
2. Install the module and bracket assembly (3) to the seat riser, with the electrical connections towards the rear of the vehicle.
3. Reconnect the electrical connections to the module or modules (1, 2).
4. Align the fastener holes on the seat adjuster with the fastener holes on the seat bracket (3).
5. Bend the tabs on the seat module bracket (3) in order to hold the bracket and module assembly (3) in place on the seat riser.
6. Install the front seat bottom assembly.