Heated Seat Control Module Replacement - Rear
HEATED SEAT CONTROL MODULE REPLACEMENT - REARREMOVAL PROCEDURE
1. Remove the rear seat back.
2. Disconnect the electrical connectors to the heated seat control module.
3. Remove the fasteners from the heated seat control module.
4. Remove the rear heated seat control module from the seat back.
INSTALLATION PROCEDURE
1. Install the heated seat control module (2) to the seat back.
2. Install the heated seat control module fasteners (1).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the rear heated seat control module to 1.5 N.m (13 lb in).
3. Connect the heated seat control module electrical connections.
4. Install the rear seat back.