Power Mirrors - Memory Recall Position Inaccurate

POWER MIRRORS - MEMORY RECALL POSITION INACCURATE

TEST DESCRIPTION

Step 1:

Step 2 - 3:

Step 4 - 6:

Step 7 - 12:

The numbers below refer to the step numbers on the diagnostic table.
3. This step verifies that the personalization option for memory mirrors is activated.
4. This step determines if the mirror sensors are capable of sensing mirror position changes.
6. This step verifies that the door module has the appropriate voltage available at both the horizontal and vertical position sensor signal circuit pins. With the inoperative mirror harness connector disconnected from the associated door module, both the horizontal and the vertical position sensor signal circuits within the module should return to their highest value of 4.5 - 5.5 volts.