Lumbar Replacement - Front Seat (With RPO Code AL2)

LUMBAR REPLACEMENT - FRONT SEAT (WITH RPO CODE AL2)

REMOVAL PROCEDURE




1. Disable the SIR system.

CAUTION: Refer to SIR CAUTION in Service Precautions.

2. Remove the seat back cover and pad.
3. Disconnect the power lumbar assembly (4) and the heated seat electrical connectors.

IMPORTANT: Note the location and position of the power lumbar and heated seat wiring for proper installation location.

4. Remove the retainer clips securing the power lumbar assembly (5) to the seat back frame (2).
5. Remove the power lumbar assembly (5) from the seat back frame.

INSTALLATION PROCEDURE




1. Install the power lumbar assembly (5) to the seat back frame (2).
2. Install the six retainers in order to secure the power lumbar assembly to the seat back frame.
3. Route the power lumbar and heated seat electrical connectors (4) through the seat cushion frame.
4. Connect the electrical connectors.
5. Install the seat back cover and pad.
6. Verify proper operation of the power lumbar support.
7. Enable the SIR System.